Sony Vaio Fx Laptop Disassembly
5 months ago Rohit Shetty Comments Off on Sony Vaio Fx Laptop Disassembly
Laptop Disassembly and Processor substitute steps. All this operation require all of your attention and your information If you are a little queasy about tearing apart your computer and changing the processor maybe this can assist. You must remember that replacing the processor is a volatile element to do. You want:
1 Small Flat Bladed popular screwdriver
1 Very Small Phillips head screw driving force
Some Thermal compound to put on the new processor.
A cellular Duron processor or a mobile Athlon processor of the “25W Balanced” range. The processor utilized in this situation is a Mobile Athlon 4 1.2Ghz processor. The processor might be of the 35W variety. However, the 35W processors do not work efficaciously in all laptops.
Step 1 Backup all your essential things.
Step 2 Take out the batteries and unplug the PC from the AC adapter.
Step three Chose a unfastened region like an empty computer region the computer on it then open the PC and tilt the display all the way back. Place a newspaper or something over the pinnacle of the display so that you do not scratch or scuff it.
Step 4 You have first to dispose of the panel that has the audio system and electricity button on it. It is secured by using 1 little screw on the left-hand facet of the panel. Remove the screw and then slide the panel to the right. With the panel slid to the right you could then carefully lay it at the display.
Step 5 Now you need to do away with the keyboard. There is 1 little screw securing the keyboard. This screw is located above the F6 key. Remove the screw. Lift the keyboard through the pinnacle, wherein the Function keys are, and slide it out closer to the top of the computer. Lay the keyboard on the pinnacle of the panel this is all prepared on top of the show.
The Heat Sink/Fan aggregate is now handy as well as the hard disk drive and DVD drive.
Step 6 You want to cautiously eliminate a few copper ground straps connected to the Heat Sink/Fan blend. These copper strips have adhesive on them and can be carefully peeled returned out of the way. There is one copper strap on the pinnacle of the meeting, below the show panel assist this is very difficult to take away. Left this strap in the region till you surely commenced the removal of the Heat Sink/Fan mixture.
Step 7 There is one small bracket on the Heat Sink/Fan combo through the screw on the top left nook that is secured to the Heat Sink/Fan combo with the aid of every other little screw. There is an arrow with the wide variety 3 pointing to this bracket. Remove the screw for that bracket and rotate the bracket out of the manner.
Step eight There are three screws securing the Heat Sink/Fan combination to the motherboard. 1 screw (Labeled with an arrow and the Number 1) is on the top right, the second screw (Labeled with an arrow and the Number 2) is the decrease left, and the third screw (Labeled with an arrow and the Number three) is on the higher left. These screws are identified at the Heat Sink with the arrow and the numbers 1, 2, three. Unscrew all three screws. The screws will no longer come out of the Heat Sink/Fan combo. Just unscrew them till the heat sink is free of the motherboard.
Step nine This isn’t always necessary, but you could unplug the fan strength leads from the motherboard. The fan energy connector unplugs, from the motherboard, by lifting immediately up.
Step 10 You at the moment are equipped to put off the Heat Sink/Fan Combo. Remember there is still a copper floor strap stuck to it on the top beneath the show panel brackets. Carefully paintings the Heat Sink/Fan combination back and forth to unstick it from the processor and to start unsticking the copper strap. You can be capable of slip the Heat Sink/Fan mixture toward the bottom of the laptop and rotate it to the left to get the copper strap off of Heat Sink/Fan combination.
Read More Articles :
- MWC 2017: Sony launches slow-mo Xperia XZ Premium smartphone
- Sony Needs More Than a Used Alphabet To Revive The Xperia
- Security Camera Knows Who’s Home With Google Face Tech
- How to Enjoy an Unforgettable Cuba Travel Experience
- Sony policies out getting into hybrid gaming consoles
With the Heat Sink/Fan mixture out of the manner, you now have to get right to entry to the processor and the unique ZIF socket that the processor is in.
OK take a deep breath now due to the fact this is maybe the scariest part.
Step eleven It’s time to cast off the processor. You want a small flat bladed screw driving force for this part.
The processor is going to slip to the proper within the ZIF socket. Put the screw driving force inside the notch on the left face and begin to apply strain to the right. The processor will slide about 1/8th of an inch to the right.
Step 12 Before eliminating the antique processor observe how it is orientated in the slot. The new processor will want to be oriented the same way. Peel off the plastic cowl from the old processor and region it on the brand new processor. Remove the antique processor and region the new processor in its location.
Step 13 With the brand new processor in the vicinity you presently need to shut the ZIF socket. Place the screw motive force inside the notch on the right and begin to use strain to the left. The processor will slide about 1/8th of an inch to the left. Now you simply must position the entirety returned and you’re accomplished. Do now not forget to place some Thermal Grease on the processor before you placed the Heat Sink/Fan combination lower back on.
Step 14 Carefully role the Heat Sink/Fan combo returned over the top of the processor. Tighten the 3 Heat Sink/Fan combo screws.
Step 15 Plug the cooling fan energy leads back into the motherboard.
Step sixteen Place the little bracket you eliminated in Step 7 again onto the Heat Sink/Fan mixture
Step 17 Place all the copper ground straps into their correct locations.
Step 18 Carefully test all the Heat Sink/Fan Screws. Carefully take a look at which you plugged within the cooling fan Power Connectors.
Step 18 Place the keyboard back into the vicinity and tighten down its screw.
Step 19 Place the Speaker Panel returned into an area and tighten down its screw.
Step 20 Start the Laptop and enter the bios setup display by means of Pressing F2 because it starts of evolved booting you’re successful.